Ceros

Our new directional connector, the Ceros, helps align loads in the correct orientation and is simple to use. This added security is achieved with a removable, tamper-resistant captive bar that holds the Ceros captive on a harness or lanyard and a horn which prevents devices moving onto the connector’s spine. Also available with an internal wire gate. A full section top bar resists wear.

Read More
Product NameProduct CodeColourMBS (Major Axis)MBS (Minor Axis)MBS (Gate Open)DimensionsWeightGate Opening (X)Conformance
Ceros Screwgate Captive BarA562CBTitanium/Lime25kN7kN7kN74 x 121mm87g20mmEN 362:2004 B & T, EN 12275:2013 B, H & T
Ceros Kwiklock Captive BarA563CBTitanium/Red25kN7kN7kN74 x 121mm94g19mmEN 362:2004 B & T, EN 12275:2013 B, H & T
Ceros Locksafe Captive BarA567CBTitanium/Green25kN7kN7kN74 x 121mm95g19mmEN 362:2004 B & T , EN 12275:2013 B, H & T
Ceros ScrewgateA562Titanium/Lime25kN7kN7kN74 x 121mm86g20mmEN 362:2004 T, EN 12275:2013 B, H & T
Ceros KwiklockA563Titanium/Red25kN7kN7kN74 x 121mm92g19mmEN 362:2004 T, EN 12275:2013 B, H & T
Ceros LocksafeA567Titanium/Green25kN7kN7kN74 x 121mm93g19mmEN 362:2004 T, EN 12275:2013 B, H & T
Kwiklock
Kwiklock - Auto-locking gate requiring two separate actions to open. Kwiklock gates are suitable when auto-locking gates are a necessity, but rigging systems are relatively static and anchor points are easy to monitor.
Locksafe
Locksafe - An auto-locking gate requiring three separate actions to open. Locksafe gates give extra security in complex rigging systems such as those featuring running ropes or remote anchor points.
Screwgate
Screwgate - Non auto-locking gate which requires two actions to open, and is easy to use with one hand. Screwgates are suitable in systems where anchor points can be easily monitored and are unlikely to be affected by running ropes.